EE-200 10 mil General Purpose Heavy Duty Electrical Tape
A 10 mil (0,25mm) heavy duty, general purpose, pressure
sensitive vinyl tape for all types of mechanical and electrical
applications. Additional thickness allows for quicker buildups and
added abrasion protection. EE-200 is flame retardant and can be
used as primary insulation for splices at not more than 600 volts.
UL 510, CSA 22.2, ASTM-D-2301, MIL-I-7798A.
Clicking on an item's Part Number will add it to your enquiry cart
610 6 mil
Commercial Grade Electrical Tape for Europe
A 6 mil (0,15mm) general purpose vinyl plastic insulation tape
used for primary electrical insulation for all wire and cable
joints and repairs below 600 Volts. It has good resistance to
abrasion, alkalis, acids and varying weather conditions (include
sunlight). Lead free and flame retardant. Available colors are:
black, red, white, blue, yellow, orange, green, purple, brown and
grey. Meet IEC60454-3-1, VDE Approved.
Clicking on an item's Part Number will add it to your enquiry cart| CJS Catalogue Number | Colour | Dimensions |
|---|
| PLY-610BK | Black | 19mm x 0,15mm x 20m |
| PLY-610GN | Green | 19mm x 0,15mm x 20m |
| PLY-610YW | Yellow | 19mm x 0,15mm x 20m |
| PLY-610RD | Red | 19mm x 0,15mm x 20m |
| PLY-610BL | Blue | 19mm x 0,15mm x 20m |
| PLY-610WT | White | 19mm x 0,15mm x 20m |
| PLY-610OR | Orange | 19mm x 0,15mm x 20m |
| PLY-610PF | Purple | 19mm x 0,15mm x 20m |
| PLY-610GR | Grey | 19mm x 0,15mm x 20m |
| PLY-610BN | Brown | 19mm x 0,15mm x 20m |
| PLY-610Y/G | Yellow/Green | 19mm x 0,15mm x 20m |
| PLY-610-RAINBOW | Rainbow | 10 x 19mm x 0,15mm x 20m |
Application Tips:
The tape shall be applied to a dry, clear surface, in
half-covered layers with suitable tension to produce a uniform wrap
(mostly this tension will reduce the tape's width to about 5/8 of
its original width). On pigtail splices, the tape shall be wrapped
beyond the end of the wires and then folded back, leaving a
protective cushion to resist cut-through. Wrap tape up-hill, wrap
from a smaller diameter surface to a larger diameter surface
gradually. Apply the tape with no tension on the last wrap to
prevent flagging.
